Total Station Hi Target ZTS 120 / 120R Reflectorless is full-featured to meet your requirement in professional coordinate, angle, and distance measurement. It comes with intelligent calibration and optical, mechanical and electrical precision ranging system. Reflectorless distance measurement up to 350 is out of question. The total station is also equipped with high efficient absolute encoder angle measuring system. This series is provided in 2 different models.
ZTS-120R reflector-less laser total station
Fitur Total Station Hi Target ZTS 120 / 120R Reflectorless
Designed with multi-dot matrix LCD display, the total station can show almost all of the measurement information at one time. With lighting function, the menu structure and practical measurement procedures displayed on the big screen are much more concisely and clearly. The total station has a 2 sides alphanumerical keyboard, thus various measurement tasks can be operated fast and conveniently.
Advanced Precision Ranging System
A new high optical, mechanical and electrical precision ranging system is integrated into the total station. With high stability mechanical structure and high integrated circuit design, this system has greatly improved the ranging accuracy and stability.
High Efficient Angle Measurement System
Due to the high efficiency absolute encoder technology, the angle accuracy and stability of the total station is highly enhanced, while the degree of automation is also improved. It need no initialization at startup, and can automatically save the horizontal angle during operation. After turning off, re-orientation is needless at the same total station at re-startup, because original information can be obtained. It can provide more convenience and efficiency in surveying and instrumental maintenance.
The total station has integrated the elements of production, installation, detection, maintenance etc. into R&D and design phase. Users can take advantage of the special maintenance calibration software to easily realize the basic maintenance and calibration completely through software. Remote assistance is also supported.
Reflectorless Distance Measurement Technology
Thanks to the slender laser beam precise ranging technology, the ZTS-120R total station sports great advantage in distance measurement. The laser beam can pass through fine draw and gridding objects, and operators can aim the target and get the correct result fast and accurately without any impact. This reflectorless distance measurement technology also does a good job in small angle target precise ranging, coaxial sighting and distance measuring optics.
Multiple Built-in Software
Full screen angle difference dHR, horizontal distance difference dHD and relative coordinate difference are displayed to realize point stakeout.
Staking points coordinate is calculated by the length and offset distance from the staking points distance reference line starting point to realize line stakeout.
Angle Distance Stakeout
Known angle and distance are used to realize angle distance stakeout.
The detailed information of angle, coordinates, slope distance, horizontal distance difference and instrument high, prism high, etc are recorded by the program.
In the case of existing two or more points which mutual visible, resection can ensure the precision of the turning point.
Remote elevation measurement
In order to get the clear height of high line, bridge etc, while prism is hard to be placed to measure the height of some target points, suspended high measurement is your best choice.
Missing Line Measurement
Missing Line measurement can be use for the measurement and calculation of horizontal distance, elevation difference and slope distance between two adjacent or any points which relative to the reference point.
Single Distance Offset
Target coordinates can be obtained by inputting the distance that the target point offset to the prism.
Two Distance Offset
Target coordinates can be obtained by inputting the distance from target to the end point of measuring line to.
Any point which is difficult to set up the prism can be measured by this program, such as single tree, bridge pier, telegraph pole, corner of wall and so on.
The measurement of a target apart from a prism is possible by inputting the fore-and-aft and right-and-left deviation from target to prism.
This application function can measure the length from prism to the starting point of baseline, the length from prism to baseline, as well as the elevation difference prism relative to the baseline.
This application function can calculate and reset the Z coordinate of station by using the coordinates of known points.
The azimuth angle from station point to any target point can be measured conveniently.
Specification of Total Station Hi Target ZTS 120 / 120R Reflectorless
|Measurement Method||Absolute Code|
|Angle Measuring Accuracy||2″|
|Field of View||1°30′|
|Minimum Focus Distance||1.5m|
|System||Single-axis liquid-electric tilt sensor Compensator|
|Distance measurement Reflector (IR)|
|Range||Single Prism (Atmosphere general / good / best)||2000m/2500m/3000m|
|Range||White Target board||350m|
|Measurement Time(short distance/tracking/prism)||2s|
|Communication||Internal Data Memory||20000 Points|
|Interface||Standard RS232 port (USB port / Bluetooth optional )|
|Data Format||ASCII(DXF/GSI optional )|
|Operation System||Real-time English operating system|
|Display||Graphics:192*96 pixels ,6 line*12 characters|
|Laser Plummet||Type||Laser Point, Brightness Adjustable in steps|
|Centering Accuracy||1 mm at 1.5m instrument height|
|Power Supply||Battery Type||Lithium-Ion|
|Operating Time with ZBA-400||16 hours|
|24hous(Continuous Angle Measurement )|
|Weight (Incl. Battery &Tribrach)||5.5kg|
|Dust &Water Proof (IEC60529)||IP54|
2 Unit Almunium Tripod